Error Codes

Error codes listed in this page are for error codes which you find on LCD of logger or PDF report created by logger.

Error codes from TempSen software or any other TempSen services have different meanings with errod codes listed in this page

错误代码	LCD显示	报告显示	描述	解决方案
004	E004 / Err004	E0004	Device reset resulted from power system restart i.e. Removing battery after configuration or power system failure Battery failed	Reconfigure the logger
006	E006 / Err006	E0006	Start time error, please configure device again	Reconfigure the logger
009	E009 / Err009		Start failure due to low battery	Replace battery (multi-use logger) and reconfigure the logger
101	E101 / Err101		Configuration file checksum error, please configure device again	Reconfigure the logger
102	E102 / Err102		Configuration file error, incorrect device model Please select configuration profile for target device, i.e., if you are going to program a Tempod logger, please select the configuration profile created for Tempod 30, e.g. this error will occur if you applied configuration profile of Tempod 50x to Tempod 30 logger.	Reconfigure the logger with correct configuration profile
104	E104 / Err104		Configuration file error, incompatible device version
105	E105 / Err105		When target device is locked with AccessKey (device password), you need to provide the correct AccessKey when programming the target device, this error occurs when you did not provide a correct AccessKey when programming a locked device.	Reconfigure the logger with correct AccessKey
106	E106 / Err106		Configuration file, incorrect auto start time	Reconfigure the logger with correct start time, which must be later than current time